NAME
    IO::Socket::Multicast - Send and receive multicast messages

SYNOPSIS
      use IO::Socket::Multicast;

      # create a new UDP socket ready to read datagrams on port 1100
      my $s = IO::Socket::Multicast->new(LocalPort=>1100);

      # Add a multicast group
      $s->mcast_add('225.0.1.1');

      # Add a multicast group to eth0 device
      $s->mcast_add('225.0.0.2','eth0');

      # now receive some multicast data
      $s->recv($data,1024);

      # Drop a multicast group
      $s->mcast_drop('225.0.0.1');

      # Set outgoing interface to eth0
      $s->mcast_if('eth0');

      # Set time to live on outgoing multicast packets
      $s->ttl(10);

      # Turn off loopbacking
      $s->loopback(0);

      # Multicast a message to group 225.0.0.1
      $s->mcast_send('hello world!','225.0.0.1:1200');
      $s->mcast_set('225.0.0.2:1200');
      $s->mcast_send('hello again!');

DESCRIPTION
    The IO::Socket::Multicast module subclasses IO::Socket::INET to enable you to manipulate multicast groups. With
    this module (and an operating system that supports multicasting), you will be able to receive incoming multicast
    transmissions and generate your own outgoing multicast packets.

  INTRODUCTION

    Multicasting is designed for streaming multimedia applications and for conferencing systems in which one
    transmitting machines needs to distribute data to a large number of clients.

    IP addresses in the range 224.0.0.0 and 239.255.255.255 are reserved for multicasting. These addresses do not
    correspond to individual machines, but to multicast groups. Messages sent to these addresses will be delivered to
    a potentially large number of machines that have registered their interest in receiving transmissions on these
    groups. They work like TV channels. A program tunes in to a multicast group to receive transmissions to it, and
    tunes out when it no longer wishes to receive the transmissions.

    To receive transmissions from a multicast group, you will use IO::Socket::INET->new() to create a UDP socket and
    bind it to a local network port. You will then subscribe one or more multicast groups using the mcast_add()
    method. Subsequent calls to the standard recv() method will now receive messages incoming messages transmitted to
    the subscribed groups using the selected port number.

    To send transmissions to a multicast group, you can use the standard send() method to send messages to the
    multicast group and port of your choice. The mcast_set() and mcast_send() methods are provided as convenience
    functions. Mcast_set() will set a default multicast destination for messages which you then send with
    mcast_send().

    To set the number of hops (routers) that outgoing multicast messages will cross, call mcast_ttl(). To activate or
    deactivate the looping back of multicast messages (in which a copy of the transmitted messages is received by the
    local machine), call mcast_loopback().

  CONSTRUCTORS

    $socket = IO::Socket::Multicast->new(LocalPort=>$port)
        The new() method is the constructor for the IO::Socket::Multicast class. It takes the same arguments as
        IO::Socket::INET, except that the Proto argument, rather than defaulting to "tcp", will default to "udp",
        which is more appropriate for multicasting.

        To create a UDP socket suitable for sending outgoing multicast messages, call new() without no arguments (or
        with `Proto=>'udp''). To create a UDP socket that can also receive incoming multicast transmissions on a
        specific port, call new() with the LocalPort argument.

  METHODS

    $success = $socket->mcast_add($multicast_address [,$interface])
        The mcast_add() method will add the provided multicast address to the list of subscribed multicast groups.
        The address may be provided either as a dotted-quad decimal, or as a packed IP address (such as produced by
        the inet_aton() function). On success, the method will return a true value.

        The optional $interface argument can be used to specify on which network interface to listen for incoming
        multicast messages. If the IO::Interface module is installed, you may use the device name for the interface
        (e.g. "tu0"). Otherwise, you must use the IP address of the desired network interface. Either dotted quad
        form or packed IP address is acceptable. If no interface is specified, then the multicast group is joined on
        INADDR_ANY, meaning that multicast transmissions received on any of the host's network interfaces will be
        forwarded to the socket.

    $success = $socket->mcast_drop($multicast_address)
        This reverses the action of mcast_add(), removing the indicated multicast address from the list of subscribed
        groups.

    $loopback = $socket->mcast_loopback
    $previous = $socket->mcast_loopback($new)
        The mcast_loopback() method controls whether the socket will receive its own multicast transmissions (default
        yes). Called without arguments, the method returns the current state of the loopback flag. Called with a
        boolean argument, the method will set the loopback flag, and return its previous value.

    $ttl = $socket->mcast_ttl
    $previous = $socket->mcast_ttl($new)
        The mcast_ttl() method examines or sets the time to live (TTL) for outgoing multicast messages. The TTL
        controls the numbers of routers the packet can cross before being expired. The default TTL is 1, meaning that
        the message is confined to the local area network. Values between 0 and 255 are valid.

        Called without arguments, this method returns the socket's current TTL. Called with a value, this method sets
        the TTL and returns its previous value.

    $interface = $socket->mcast_if
    $previous = $socket->mcast_if($new)
        By default, the OS will pick the network interface to use for outgoing multicasts automatically. You can
        control this process by using the mcast_if() method to set the outgoing network interface explicitly. Called
        without arguments, returns the current interface. Called with the name of an interface, sets the outgoing
        interface and returns its previous value.

        You can use the device name for the interface (e.g. "tu0") if the IO::Interface module is present. Otherwise,
        you must use the interface's dotted IP address.

        NOTE: To set the interface used for incoming multicasts, use the mcast_add() method.

    $dest = $socket->mcast_dest
    $previous = $socket->mcast_dest($new)
        The mcast_dest() method is a convenience function that allows you to set the default destination group for
        outgoing multicasts. Called without arguments, returns the current destination as a packed binary sockaddr_in
        data structure. Called with a new destination address, the method sets the default destination and returns
        the previous one, if any.

        Destination addresses may be provided as packed sockaddr_in structures, or in the form "XX.XX.XX.XX:YY" where
        the first part is the IP address, and the second the port number.

    $bytes = $socket->mcast_send($data [,$dest])
        Mcast_send() is a convenience function that simplifies the sending of multicast messages. `$data' is the
        message contents, and `$dest' is an optional destination group. You can use either the dotted IP form of the
        destination address and its port number, or a packed sockaddr_in structure. If the destination is not
        supplied, it will default to the most recent value set in mcast_dest() or a previous call to mcast_send().

        The method returns the number of bytes successfully queued for delivery.

        As a side-effect, the method will call mcast_dest() to remember the destination address.

        Example:

          $socket->mcast_send('Hi there group members!','225.0.1.1:1900') || die;
          $socket->mcast_send("How's the weather?") || die;

        Note that you may still call IO::Socket::INET->new() with a PeerAddr, and IO::Socket::INET will perform a
        connect(), creating a default destination for calls to send().

EXAMPLE
    The following is an example of a multicast server. Every 10 seconds it transmits the current time and the list of
    logged-in users to the local network using multicast group 226.1.1.2, port 2000 (these are chosen arbitrarily).

     #!/usr/bin/perl
     # server
     use strict;
     use IO::Socket::Multicast;

     use constant DESTINATION => '226.1.1.2:2000'; 
     my $sock = IO::Socket::INET->new(Proto=>'udp',PeerAddr=>DESTINATION);

     while (1) {
       my $message = localtime;
       $message .= "\n" . `who`;
       $sock->send($message) || die "Couldn't send: $!";
     } continue {
       sleep 10;
     }

    This is the corresponding client. It listens for transmissions on group 226.1.1.2, port 2000, and echoes the
    messages to standard output.

     #!/usr/bin/perl
     # client

     use strict;
     use IO::Socket::Multicast;

     use constant GROUP => '226.1.1.2';
     use constant PORT  => '2000';

     my $sock = IO::Socket::INET->new(Proto=>'udp',LocalPort=>PORT);
     $sock->mcast_add(GROUP) || die "Couldn't set group: $!\n";

     while (1) {
       my $data;
       next unless $sock->recv($data,1024);
       print $data;
     }

  EXPORT

    None by default. However, if you wish to call mcast_add(), mcast_drop(), mcast_if(), mcast_loopback(), mcast_ttl,
    mcast_dest() and mcast_send() as functions you may import them explicitly on the use line or by importing the tag
    ":functions".

  BUGS

    The mcast_if() method will cause a crash on versions of Linux earlier than 2.2.0 because of a kernel bug in the
    implementation of getsockopt().

AUTHOR
    Lincoln Stein, lstein@cshl.org.

    This module is distributed under the same terms as Perl itself.

SEE ALSO
    perl(1), IO::Socket(3), IO::Socket::INET(3).